IMPORTANT NOTE:

Before your CHOMPI will power on, you will first need to connect it to a USB power source and start charging the built-in rechargeable battery. It might be a good idea on this initial charge to keep it plugged in for a couple hours to get a nice full first charge cycle. But feel free to play and charge CHOMPI at the same time ;)

Generally speaking, CHOMPI's internal battery should be fine to charge with most standard USB power sources that you would normally charge your phone or tablet with. That being said, we recommend using a dedicated USB power brick for optimal performance.

• Minimum power brick spec for charging while unit is turned off = 5v @ 0.5A
• Recommended USB Power Brick for full time operation and charging at the same time = 5v @ 2A (or higher)

QUICK TIP: CHARGING

To confirm that your CHOMPI is indeed charging, there is a small Red LED indicator light that shines near the inside of the USB-C port while the battery is charging. This Red glow will turn off when the battery has reached full charge.

Step 03: Jam Time